Model
Suffix code
Description
BP
□
□
□
□
Multi Pulse Meter
Size
6
  
DIN Size: W72 x H36 mm 
Displayable Digits
5
5 digits 1 stage
Power Supply
Specification
A
100 ~ 240V AC (50/60 Hz)
D
12 ~ 24V DC
Output Specification Size - 6
N
Only display
-
-
1
Relay 3 stages Output
-
2
Relay 3 stages Output
4 ~ 20 mA Current Output
3
Relay 3 stages Output
485 communication
4
NPN Open Collector 5
Stages Output
4 ~ 20 mA Current Output
Bank
External
Selection
Function
5
NPN Open Collector 5
Stages Output
485 communication
6
-
BCD Output
4~20 mA
Current
Output
7
Relay 3 stages Output
-


■ Ratings
Power Supply
100 ~ 240 V AC 50/60 Hz
Power Consumption
Approx. 3.5 VA (240 V AC)
Voltage for Sensor
12 V DC ± 10 % 80 mA
Measurement Accuracy
• Mode F1, F4, F10, F11, F12, F13: FS ± 0.05rdg ± 1 dig
• Mode F2, F3, F5, F6: FS ± 0.01 %rdg ± 1 dig
Measurement Range
• Mode F1, F10, F11, F12, F13: 0.0005 Hz ~ 50 Hz
• Mode F3, F4: 0.02 s ~ 3.200 s
• Mode F2, F5, F6: 0.01 s ~ 3.200 s
• Mode F7, F8, F9: 0 ~ 4 x 109 Count
Input Signal
Non-Contact Input:
Max. 50 Hz (ON/OFF width for each above 10 )
(ON voltage: 4.5 V ~ 24 V, OFF voltage: 0 ~ 1.0 V)
Contact Input:
Max. 50 KHz (ON/OFF width for each above 8.3 ms)
(12 V DC, able to switch the current of 2 mA sufficiently)
Max. Displayable Digits
5 digits (-19999 ~ 99999)
Display Method
7 Segment
Display Cycle
0.05/0.5/1/2/8sec
(each setting for each bank/batch setting selection function)
Hysteresis
0 ~ 9999 (each setting for each bank/batch setting
selection function, applicable only for output type)
Functions
• Auto Zero Time Setting Function
• Display Cycle Setting Function
• Time Unit Selection Function
(each setting for each bank/batch setting selection function)
• Parameter Lock Function
• 4 Steps Bank Setting Function
• Remote/Local Conversion Function
(applicable only for communication output type)
• Current Output Range Selection Function
(applicable only for current output type)
• Max. Min. Peak Value 10 Steps Memory Function
(Max.: 4 steps save, Average Value Save
Min.: 4 steps save, Average Value Save)
• Start Compensation Timer Function
• Electricity Failure Compensation (applicable only for F9)
• Comparative Output Function (HH, H, GO, L, LL)
Output
Output
Types
• Transistor Output (NPN Open Collector Output):
Comparative, Alarm Output
• Relay Output (HH, H, GO, L, LL)
• PV Transfer Output (4 ~ 20 mA DC): Displayed Value Output
• RS485 Communication Output (32 channels): Displayed
Value Output, PC Setting Function (See the Output Specification)
• BCD Dynamic Displayed Value Output Function
Relay
(main)
277 V AC 3 A, 30 V DC 3 A MAX.
Non-Contact
(main)
NPN Open Collector 12 ~ 24 V DC 30 mA MAX.
BCD
NPN Open Collector 12 ~ 24 V DC 30 mA MAX.
Current
4 ~ 20 mA DC Indicated Value(PV) Output, Resistive Load : below 600 Ω
Current Input
4 ~ 20 mA DC Input
RS-485 Communication
32 channels, two-way communication is possible
Memory
Non-volatile Memory (10 years)
Insulation Resistance
Above 10 MΩ (at 500 V DC mega) Between electrically
chargeable part and non-electrically chargeable part
Noise Immunity
By noise simulator, square-shaped wave noise (pulse width 1µs) ±2000 V
Life
Expentancy
Mechanical
Above 100 thousand times
(250 V AC 3 A, switching: 20 times/1 minute)
Electrical
Above 5 million times (switching: 180 times/1 minute)
Dielectric Strength
2000 V AC 60 Hz for 1 minute
(between AC power terminal and case,
between AC terminal and measurement input terminal)
Vibration
Resistance
Durability
10 ~ 55 Hz double amplitude width 0.75 mm
in each X Y Z direction for 2 hours
Malfunction
10 ~ 55 Hz double amplitude width 0. 5 mm
in each X Y Z direction for 10 minutes
Shock
Resistance
Durability
300 m/s² (approx. 30G) in each X Y Z direction for 3times
Malfunction
100 m/s² (approx. 10G) in each X Y Z direction for 3times
Operating Ambient
Temperature
-10 ~ +50 °C (without condensation)
Storage Temperature
-20 ~ +60 °C (without condensation)
Operating Ambient
Humidity
35 ~ 85 % RH
Weight
Approx. 135 g