Name |
LEVEL INDICATING |
Model |
2L-LI-D/P |
Input Voltage |
AC 220V (100V separate order) |
output |
4/20mA |
Input |
input current (4~20mA) |
Function |
Indicator for various kids of tanks |
Panel CUT |
92 × 45 |
SIZE |
98×50×102(H×W×D) |
Model |
|
2L-LI-D/P (Resistance Input ) |
|
Input Voltage |
|
AC 220V (100V separate order) |
|
Contact Point Capacity |
|
0~300Ω / 4~20mA
(Separate Order) Voltage Outpu0~1.5V(%) |
|
Feature |
|
Digital Indicator without separate uinit ( Built-in Panel Meter Amplifier) |
|
Function |
|
Indicator for various kids of tanks |
|
Panel CUT |
|
92 × 45 |
|
SIZE |
|
98×50×102 |
|
Material |
|
- HEAD - Nylon Fiber
- FLOAT- P/P foaming
- PIPE - SUS 304 | |
|
Model |
|
2L-LI-D/P (Current Input) |
|
Input Voltage |
|
AC 220V (100V separate order) |
|
output |
|
4/20mA |
|
Input |
|
4/20mA |
|
Function |
|
Indicator for various kids of tanks |
|
Panel CUT |
|
92 × 45 |
|
SIZE |
|
98×50×102 (H×W×D) |
|
Material |
|
- HEAD - Nylon Fiber
- FLOAT- P/P foaming
- PIPE - SUS 304 | |
|
|
|
▶ |
2L-LI-D/P is the Digital Level Indicating Controller built in a Micom Chip, it can check the indicating value as setting High/Low level alarm and Auto Feeding/Drainage for various kinds of tanks as Digital Mode. It is the Resistance Input (0~300Ω) Type of level controller built in the function isolating a contact output in case of the line disconnecting or the abnormal condition of sensor. |
▶ |
Composed easy to control and set-up, it is manufactured to operate strongly against the power noise or the induction of sensor line, etc. | | |
|
(Resistance Input ) |
Using power : AC 220V 60Hz 2W (Special order - 100V) |
Input Signal : 0~300Ω Resistance(Indicating Meter Sensor & Parallel mode) |
Error : ±0.5FS |
Operating condition : 0-50℃ 0-90%RH |
Outer dimension : 98x50x102(HxWxD) CUT/92x45 |
Usage : Level indicating Controller for various kinds of Water tank, Oil tank, etc Sensor is required to use with less than 80℃ (Separate order with more than 80℃) | | |
|
|
|
▶ |
2L-LIC-D/P is the Digital Level Indicating Controller built in a Micom Chip, it can check the indicating value as setting High/Low level Alarm and Auto Feeding/Drainage for various kinds of tanks as Digital Mode. It is the Current Input (4-20mA) Type of Level Controller built in the function isolating contact output in case of line disconnecting, short or the abnormal condition of sensor. |
▶ |
Composed easy to control and set-up, it is manufactured to operate strongly against the power noise or the induction of sensor line, etc | | |
|
(Current Input) |
Using power : AC 220V 60Hz 2W (Special order - 100V) |
Input Signal : 4~20mA (Indicating Meter & Sensor Series mode) |
Error : ±0.5FS |
Operating condition : 0-50℃ 0-90%RH |
Outer dimension : 98x50x102(HxWxD) CUT/92x45 |
Usage : Level indicating Controller for various kinds of Water tank, Oil tank, etc Sensor is required to use with less than 80℃ (Separate order with more than 80℃) | | |
|
|
▣ |
[1]Fill the existence of pressure such as non-pressure tank, pressure tank(less than 5 kg) according to the classes of tanks and separate entry is required if temperature is high (more than 80℃). (Special order in case of more than 5K) |
▣ |
There are two types; Flange and Screw type. In case of a Flange type, it should use with 3″(80Φ)4″(100Φ), In case of a Screw type, 2″(50Φ) socket should be welded to a tank. |
▣ |
Separate order is required for special chemicals and high temperature use. (80℃ and more) | |
Gear-type Sensor |
Flexible Sensor |
◆ |
As Gear-type sensor hasn't the height of ceiling, it is ordered and manufactured as a Gear-type when sensor isn't able to put in a tank. |
◆ |
Refer to the Gear-Type in the tail of 35~36 page |
◆ |
Temperature should be less than 80℃ only (Oil, Water, etc). |
◆ |
Special order is required for the chemicals tank such Hydrochloric acid, Sulphuric acid |
|
|
|
[Attention!] Never use to a Pressure tank | |
◆ |
As Flexible-type sensor hasn't the height of ceiling, it is ordered and manufactured as a Flexible-type when sensor isn't able to put in a tank. |
◆ |
In the lower part of sensor, the stain weight is an one-touch fitting. Simple to put a hose in (50mm/m socket-type). |
◆ |
When handling a sensor, Put a stain weight in first and continue to put with care while remaining a sensor as the original position. (Be careful not to be bent) |
◆ |
When delivering, deliver as a fixed position to the handling frame (PVC Pipe) and Do not give an impulse or throw. (It can be the reason of damage) |
◆ |
Temperature should be less than 80℃ only (Oil, Water, etc) |
|
[Attention!] Never use to a Pressure tank. | | |
|
查看评论 |
|
|
如果您用过本商品,或对本商品有所问题,欢迎发表自己的评论和问题。我们会及时对您提出的问题解答,对您的评论给予鼓励。谢谢对本站的支持。 |
|
|
1.根据您的需要产品,请选定型号;
2.与我司销售人员或技术人员确认您的产品的功能,参数.
3.根据产品名称,产品型号签订购销合同
4.汇款后将汇款底联和合同;收货人地址;开票信息;发货方式传真
直线传真:0760-88306579 分机传真:0760-88886370 88886371 88886372 88886373转807分机
上海办事处传真(FAX): 15382730581 |
售后服务热线:0760-0760-88886370 88886371 88886372 88886373-805 806 803分机 移动电话:15382730581 15377871867
公司直线传真:0760-88306579 公司分机传真:0760-88886370 88886371 88886372 88886373转807分机 联系电话(TEL): 15382730581 15377871867
邮政编码: 528400 公司邮箱:459382380@qq.com 客服QQ:459382380 和 568843411 |