工业自动化控制解决方案;韩国工业电器专家。
         
    
 
用户: 密码: 验证:
详细查询
防爆声光报警器,声光报警器,报警喇叭-专业的声光报警器自动化网--商品详细资料
小圆型警示灯 · 标准型警示灯
大圆形警示灯 · 太阳能信号灯
可充电信号灯 · 方型信号灯
航空障碍灯 · 多层式信号灯
移动/流线型警示灯 · 多色单层式信号灯
光字牌信号灯 · 防爆信号灯
车用警示灯 · 船用/重负荷型警示灯
选购配件 ·
声光报警器 · 报警器
电笛/警笛 · 蜂鸣器
防爆报警器 · 信号扬声器
防爆声光报警器 · 重负荷型/船用声光报警器
声光报警器系统 · 语音合成器
电力/电工仪表 · 温度控制仪表
计数器/计米器 · 转速表/线速表
计时器/定时器 · 温湿度控制器
荷重仪表 · 变送仪表
计量仪表 · 液位控制器
记录仪 · 其它
冷冻设备仪表 · 测试仪表
显示仪表 · 流量计
压力表 ·
接近传感器 · 光电传感器
旋转编码器 · 液位传感器
压力传感器 · 称重传感器
扭矩传感器 · 电量传感器
安全光幕.光栅 · 温度传感器
光纤传感器 · 传感控制器
信号转换器 · 压力变送器
温度变送器 · 温湿度传感器
液位变送器 · PH sensor
接触器 · 空气开关
断路器 · 防水密封箱
防爆箱 · 配电柜
开关电源 · 噪音滤波器
接线端子 · 保险丝座
连接电缆 · 端子模组
继电器模组 · 电缆锁头
除湿加热器 · 电动机保护器
互感器.分流器 · 变压器
保护继电器 · 制动单元.电阻
电源转换开关 ·
按钮开关 · 微动开关
行程开关 · 十字开关
天车开关 · 押扣开关
脚踏开关 · 万轮转换开关
急停开关 · 同期开关
液位开关 · 钥匙开关
主控开关 · 选择开关
指示灯/信号灯 · 安全开关
流量开关 · 压力开关
阀门定位器 · 电磁阀
计量泵 · 换向阀
减压阀 · 调压阀
控制阀 · 电动执行器
伺服电机/马达 · 伺服控制器
交流电机 · 直流电机
鼓风机 · 减速机
发电机组 ·
功率调节器 · 中间继电器
固态继电器 · 双位置继电器
继电器底座 ·
变频器 · PLC
人机界面 · 电力监测
防爆控制按钮 · 防爆开关类
离合器.制动器 · 张力控制器
工业空调 · 其它
高压电气 · 避雷器
起重机/吊车 · 油水分离器
PCB接线端子 · 联轴器
天车声光报警 ·
首页>> 传感器类>> 温湿度传感器>> GSH-420 GSH-110 GRHO-420室内用湿度变送器

GSH-420
商品名称:GSH-420 GSH-110 GRHO-420室内用湿度变送器
商品品牌 :ginice吉事 订购电话 :0760-88886370 88886371 88886372 88886373 88732779
传真热线:0760-88306579 : 1分
浏览次数: 3419 剩余数量: 100 件
本站价 :¥1.00 优惠价 :¥1.00
数量 你的价格: 1.00
会员评级 评论星级 我要评级
详细信息 优惠信息 配送信息 售后服务
 
ROOM HUMIDITY TRANSMITTER(GSH-420)
"GSH" Room Humidity Transmitters are intended for an electronic Humidity Transmitter to measure the Relative Room Humidity (RH) and converts the measurement into an electric signal.
This unit can be used with all system equipments that can receive output signals 4-20mA DC of the detector.
This Transmitter senses relative humidity by chargeable humidity sensing element which
varies electrical capacity depending on circumstantial relative humidity
Electronic sensing circuit varies signal into 4 ~ 20mA DC ( within 0 ~ 100% relative humidity )
Sensing Accuracy is ±3% within usable range of 20 ~ 90% RH.

SUPPLY VOLTAGE

: 24V AC / DC ±20%

FREQUENCY

: 50 or 60㎐

SENSING ELEMENT

: Integrated Circuity

POWER CONSUMPTION

: 0.35VA

SENSING RANGE

: 0 ~ 100%Rh

ACCURACY

: 20°C at 20~90%Rh within ± 3%Rh

OUTPUT SIGNAL

: 4 ~ 20mA DC

SENSING TIME

: Apprx. 20 sec

AMBIENT TEMPERATURE

: 1) On Operation : 0 ~ +50℃
2) On Transportation & Storage : -25°C ~+65°C

AMBIENT HUMIDITY

: 1) On Operation : below 100%RH
2) On Transportation & Storage : below 95%RH

WIRING

: wires, 1.0㎟ or Shield Cable

WEIGHT

: 0.06Kg

HOUSING

: plastic case

PROTECTION CLASS

: IP 30

The element must not be touched and should be protected dust, water, spray and condensation.
The sensor element must not be exposed to organic solvents, sylphid bearing materials.
Do not use a DC test meter as this will damage the sensor element.
Select a location approx 1.5M above the floor.
The sensor location should also be reasonably clean and free from damp and condensation.
Fix with the bolts provided in pull box(50 × 100, 100 × 100)
To avoid the conductive current the wires should be separated from power lines.
Use the shield line when wiring
ROOM HUMIDITY TRANSMITTER(GSH-110)
"GSH" Room Humidity Transmitters are intended for an electronic Humidity Transmitter to measure the Relative Room Humidity (RH) and converts the measurement into an electric signal.
This unit can be used with all system equipments that can receive output signals 0-10VDC of the detector.

This Transmitter senses relative humidity by chargeable humidity sensing element which
varies electrical capacity depending on circumstantial relative humidity
Electronic sensing circuit varies signal into 0-10V DC ( within 0 ~ 100% relative humidity )
Sensing Accuracy is ±3% within usable range of 20 ~ 90% RH.

SUPPLY VOLTAGE

: 24V AC/DC ±20%

FREQUENCY

: 50 or 60㎐

SENSING ELEMENT

: Integrated Circuity

POWER CONSUMPTION

: 0.35VA

SENSING RANGE

: 0 ~ 100%Rh

ACCURACY

: 20°C at 20~90%Rh within ± 3%Rh

OUTPUT SIGNAL

: 0-10V DC (0 - 1V DC)

SENSING TIME

: Apprx. 20 sec

AMBIENT TEMPERATURE

: 1) On Operation : 0 ~ +50℃
2) On Transportation & Storage : -25°C ~+65°C

AMBIENT HUMIDITY

: 1) On Operation : below 100%RH
2) On Transportation & Storage : below 95%RH

WIRING

: wires, 1.0㎟ or Shield Cable

WEIGHT

: 0.06Kg

HOUSING

: plastic case

PROTECTION CLASS

: IP 30

The element must not be touched and should be protected dust, water, spray and condensation.
The sensor element must not be exposed to organic solvents, sylphid bearing materials.
Do not use a DC test meter as this will damage the sensor element.
Select a location approx 1.5M above the floor.
The sensor location should also be reasonably clean and free from damp and condensation.
Fix with the bolts provided in pull box(50 × 100, 100 × 100)
To avoid the conductive current the wires should be separated from power lines.
Use the shield line when wiring
ROOM HUMIDITY TRANSMITTER(GRHO-420)

“GRHO“ Room Humidity Transmitter is intended for installing at the place of Heating, Ventilation facilities and specially at the place needed to be pleasantness of inside of building, and used to control and sense inside humidity possible to be used by connecting with Central control system.

SUPPLY VOLTAGE

: 15 ~ 30 V DC

OUTPUT SIGNAL

: 4 ~ 20 mA

SENSING RANGE

: 0 ~ 100%RH

SENSING ELEMENT

: Integrated Circuity

ACCURACY

: 20°C at 20~90%Rh within ± 3%Rh

WIRING

: 2 Wire

SENSING TIME

: Apprx1 min( Flexible depend on convection air and wall condition )

AMBIENT TEMPERATURE

: 1) On Operation : 0 ~ +70℃
2) On Transportation & Storage : -15°C ~+50°C

AMBIENT HUMIDITY

: 1) On Operation : below 100%RH
2) On Transportation & Storage : below 95%RH

PROTECTION CLASS

: IP 30(EN60529)

WEIGHT

: 0.08Kg

Installing Location : Install at inside wall of good ventilating space
Prohibited Location : Inside corner, shelves, behind curtain and nearby reverse side of heat source
- Keep away from direct light and the end of wire tube of Sensor should be shielded to protect
any errors caused from ventilating air coming through wire tube.
Calibration : As adjusted on delivery from factory, do not change voluntarily

查看评论
 
      如果您用过本商品,或对本商品有所问题,欢迎发表自己的评论和问题。我们会及时对您提出的问题解答,对您的评论给予鼓励。谢谢对本站的支持。
发表评论
 您的姓名:
 主题: ·尊重网上道德,遵守《全国人大常委会关于维护互联网安全的决定》及中华人民共和国其他各项有关法律法;
 评论正文:
·本站有权保留或删除您发表的任何评论内容
 
相关商品  
韩国Sanup
韩国Sanup SRT-100......
优惠价:¥1.00
购买
TG-K330外部遥控传感器EXTERNAL
TG-K330外部遥控传感器E......
优惠价:¥1.00
购买
GOH-420
GOH-420 GOH-110......
优惠价:¥1.00
购买
GSH-420
GSH-420 GSH-110......
优惠价:¥1.00
购买
更多产品>>
   常见问题
· 常见问题
   支付方式
· 在线支付
· 银行付款
   关于配送
· 本地发货
· 外地发货
   售后服务
· 保修服务
· 维修
   特别条款
· 服务保证
· 免责条款
   关于我们
· 公司简介
· 联系我们
 
客服信箱: 459382380@QQ.COM   订购热线:0760-88886370 88886371 88886372 88886373 88732779  公司地址:广东省中山市  邮编:528400 
Copyright©专业的声光报警器自动化网 
直线传真(FAX):0760-88306579    |   移动电话:15382730581 15377871867
上海办事处: 上海市浦东新区金港路333号禹州金桥国际大厦1102
联系电话(TEL): 15382730581 15377871867 自动传真(FAX): 86-15382730581 15377871867
粤ICP备09076602号