MR-ISO-H高速隔离转换器High speed isolation converter
[MR-ISO-D] DUAL channel IN/OUT isolation converter
[MR-MPC] Multiplier isolation converter
[MR-PSC2] DC power supply(2wire loop usp) (2ch)
[MR-PSC] DC power supply(2wire loop usp) (1ch)
[MR-PSA] Potentiometer alarm setter with signal out
[MR-RSA] RTD temperature alarm setter with signal out
[MR-DSA] DC signal alarm setter with signal out
[MR-PMS4] Potentiometer alarm setter (4alarm)
This is a high speed of converter used for transmitting or converting DC signal. With built-in noise removal filter, transfers correct signal, and precision isolation circuits enable perfect signal transfer not affected by withstand insulation voltage, transfer speed, noise, etc.
FEATURES Small size(mm) : 83(H), 51(W), 102(D). Isolation : input to output to power supply. Power supply : AC or DC supply. Wiring : terminal socket wiring. Case & color : black ABS plastic case. Weight : about 400g INPUT SIGNAL SPECIFICATION OUTPUT SIGNAL SPECIFICATION Output voltage signal : 12VDC max. Output voltage impedance : 2Kohm min. Output voltage noise : 10mV p-p max. Output current signal : 30mADC max. Output load resistance : 750ohm max. Output current noise(250ohm load) : 10mV p-p. Input voltage signal : -300 ~ 300 VDC. Input voltage impedance : 1Mohm min. Input current signal : 30mADC max. Input current load resistance : 100ohm max.(at 20mA)
GENERAL SPECIFICATION'S Operating ambient temperature : 0 - 50'C. Non operating ambient temperature : -20 ~ 80'C. Temperature coefficient : 0.015%/'C. Operating ambient humidity : 90% RH max.(non condensing) Insulation resistance : greater than 100Mohm with 500VDC. Dielectric strength : 1500VAC @ 1minute (input/out1/out2/power). Adjustment range : 20% (zero & span) min. Conversion accuracy : 0.2% max. Response time : 0 - 90%(1mS).
|