防爆声光报警器，声光报警器,报警喇叭-专业的声光报警器自动化网--商品详细资料

工业自动化控制解决方案;韩国工业电器专家。

报价中心

淘宝店

用户:

密码:

验证:

详细查询

防爆声光报警器，声光报警器,报警喇叭-专业的声光报警器自动化网--商品详细资料

信号灯/警示灯/塔灯
小圆型警示灯	·	标准型警示灯
大圆形警示灯	·	太阳能信号灯
可充电信号灯	·	方型信号灯
航空障碍灯	·	多层式信号灯
移动/流线型警示灯	·	多色单层式信号灯
光字牌信号灯	·	防爆信号灯
车用警示灯	·	船用/重负荷型警示灯
选购配件	·
声光报警器/警报器/扬声器
声光报警器	·	报警器
电笛/警笛	·	蜂鸣器
防爆报警器	·	信号扬声器
防爆声光报警器	·	重负荷型/船用声光报警器
声光报警器系统	·	语音合成器
仪器仪表
电力/电工仪表	·	温度控制仪表
计数器/计米器	·	转速表/线速表
计时器/定时器	·	温湿度控制器
荷重仪表	·	变送仪表
计量仪表	·	液位控制器
记录仪	·	其它
冷冻设备仪表	·	测试仪表
显示仪表	·	流量计
压力表	·
传感器类
接近传感器	·	光电传感器
旋转编码器	·	液位传感器
压力传感器	·	称重传感器
扭矩传感器	·	电量传感器
安全光幕.光栅	·	温度传感器
光纤传感器	·	传感控制器
信号转换器	·	压力变送器
温度变送器	·	温湿度传感器
液位变送器	·	PH sensor
低压电器
接触器	·	空气开关
断路器	·	防水密封箱
防爆箱	·	配电柜
开关电源	·	噪音滤波器
接线端子	·	保险丝座
连接电缆	·	端子模组
继电器模组	·	电缆锁头
除湿加热器	·	电动机保护器
互感器.分流器	·	变压器
保护继电器	·	制动单元.电阻
电源转换开关	·
开关类
按钮开关	·	微动开关
行程开关	·	十字开关
天车开关	·	押扣开关
脚踏开关	·	万轮转换开关
急停开关	·	同期开关
液位开关	·	钥匙开关
主控开关	·	选择开关
指示灯/信号灯	·	安全开关
流量开关	·	压力开关
气动/泵阀类
阀门定位器	·	电磁阀
计量泵	·	换向阀
减压阀	·	调压阀
控制阀	·	电动执行器
油压/电机类
伺服电机/马达	·	伺服控制器
交流电机	·	直流电机
鼓风机	·	减速机
发电机组	·
继电器/功率调节器
功率调节器	·	中间继电器
固态继电器	·	双位置继电器
继电器底座	·
工业自动化产品
变频器	·	PLC
人机界面	·	电力监测
防爆电器
防爆控制按钮	·	防爆开关类
其它
离合器.制动器	·	张力控制器
工业空调	·	其它
高压电气	·	避雷器
起重机/吊车	·	油水分离器
PCB接线端子	·	联轴器
天车声光报警	·

首页>> 仪器仪表>> 温度控制仪表>> SC1100 SC2100 SC1300 SC2300 SC1400 SC2400

商品名称：SC1100 SC2100 SC1300 SC2300 SC1400 SC2400

商品品牌：sensys

订购电话：0760-88886370 88886371 88886372 88886373 88732779

传真热线：0760-88306579

： 1分

浏览次数： 5532

剩余数量： 100 件

本站价：~~￥1.00~~

优惠价：￥1.00

数量：	你的价格：￥ 1.00

会员评级	我要评级

详细信息

优惠信息

配送信息

售后服务

Model : SC1100/SC2100
2CH Alarm output Digital Indicator

	Analog Output 2CH Alarm Output Data Hold Peak Hold RESET

Model : SC1300/SC2300
2CH Alarm output Digital Indicator (simple type)

	2CH Alarm Output

Model : SC1400/SC2400
4CH Alarm Output Digital Indicator

	Analog Output 4CH Alarm Output Data Hold Peak Hold RESET

Model : SC1800/SC2800
8CH Alarm Output Digital Indicator

	8STEP NPN TR Output TR Output is subject to alteration Data Hold RESET

Model : SC1500/SC2500
Digital Indicator (simple type)

	Peak Hold RESET

Model : SC110H/SC210H
High Speed Digital Indicator

	A/D Sampling Speed : 3,000/sec Analog Output 2CH Alarm Output Data Hold Peak Hold RESET

Model : SC110R/SC210R
RS232C Communication Digital Indicator

	RS-232C Output Analog Output 2CH Alarm Output Data Hold Peak Hold RESET

Model : SC110E/SC210E
RS485 Communication Digital Indicator

	RS-485 Output Analog Output 2CH Alarm Output Data Hold Peak Hold RESET

Model : SC110B/SC210B
BCD Output Digital Indicator

TTL Level BCD Output
Data Hold
Peak Hold
RESET

SC1100 and SC2100 Indicator have a Micro Processor. The model is applied best available for proper performance even in poor work environment. Easy setting by click the front button, it is possible to set Hi/Low points, full scale values, the decimal point and Calibration. When power outages it retains its data.

Model SC1100 / SC2100 - 2CH Alarm output Digital Indicator

Feature
Input Signal: 1~3mV/V(SC1100), V or mA(SC2100)
SETTING LED & DISPLAY LED
Max Readout : ±19999
Auto Zero Point Setting
Analog Output : 0, 1~5V, 10V or 0, 4~20mA(DIP S/W)
Function: Data Hold, Peak Hold, Reset
Frequency Filter : 1, 10, 100Hz(DIP S/W)
48mm×96mm Aluminum Case

	SC1100	SC2100
Sensor Sensor Excitation Sensor Supply Current Sensor Output Sensor Impedance	5VDC or 10VDC Max 20mA(5VDC), 60mA(10VDC) 1~3mV/V (DIP S/W Adjust) 120 or 350Ω	10VDC, 24VDC (5~26VDC Optional) Max 80mA(24VDC) 0~5,1~5V,0~10VDC, 0~20,4~20mA(DIP S/W Adjust) -
Analog Input Impedance Frequency Filter Analog Output Response Frequency Analog Output ZERO, SPAN Adjustment Output SHORT Protection Circuit Output Impedance Thermal Effect	More than 5MΩ	mA Input 250Ω or 500Ω, V Input More than 5kΩM (DIP S/W Adjust)
	1, 10, 100Hz Max 5kHz 0~5VDC, 1~5VDC, 0~10VDC, 0~20mA, 4~20mA(DIP S/W Adjust) ZERO, SPAN VR Adjust Internal SHORT Protection Circuit Voltage Type 500Ω, mA Type 200kΩ (DIP S/W Adjust) 0.02%FS/℃
Digital A/D Sampling Speed A/D Resolution Max Readout Height of Digits Linearity Decimal point Setting Display Type	15/sec or 30/sec ±4½ Digit ±19999 14mm(H)×8mm(W) ±0.02%FS Be Able to set number of 3 decimal by front switch 7 SEGMENT LED
General RELAY Output Electrical Connection Power Storage Temperature Operating Mounting Type Size Weight	Hi/Low A, B point of contract(AC250V/5A, DC30V/5A) SCREW TERMINAL Connection AC110(50~60Hz), AC220V(50~60Hz) -40~85℃ 0~50℃ Panel 96(W)×48(H)×143(D) 1/8DIN 650g
Option	Sensor Output :Less than 0.75mV/V, More than 3.5mV/V	Sensor Power : ±15VDC
	Reversal Output Function NPN OPEN COLLECTOR TR S/W Output

SC1300 and SC2300 Indicators have a Micro Processor. It devised economical model and simple function type. The model apply for high precise performance. Relay Output is possible.(Low/Hi, each A point of contract) Easy setting by click the front button, it is possible to set Hi/Low points, full scale values, the decimal point and Calibration. When power outages it retains its data.

Model SC1300 / SC2300 - 2CH Alarm output Digital Indicator (simple type

Feature
Input Signal: 1~3mV/V(SC1300), V or mA(SC2300)
SETTING LED & DISPLAY LED
Max Readout : ±19999
Auto Zero Point Setting
Flexible Relay(minimum & maximum Range)
Frequency Filter : 1, 10, 100Hz(DIP S/W)
48mm×96mm Aluminum Case

	SC1300	SC2300
Sensor Sensor Excitation Sensor Supply Current Sensor Output Sensor Impedance	5VDC or 10VDC Max 120mA(5VDC), 60mA(10VDC) 1~3mV/V(DIP S/W Adjust) 120 or 350Ω	24VDC Max 80mA(24VDC) 0~5,1~5V,0~10VDC, 0~20,4~20mA(DIP S/W Adjust) -
Analog Input Impedance Frequency Filter Thermal Effect	More than 5MΩ	mA Input 250Ω or 500Ω, V Input More than 5kΩM (DIP S/W Adjust)
	1, 10, 100Hz 0.02%FS/℃
Digital A/D Sampling Speed A/D Resolution Max Readout Height of Digits Linearity Decimal point Setting Display Type	15/sec or 30/sec ±4½ Digit ±19999 14mm(H)×8mm(W) ±0.02%FS Be Able to set number of 3 decimal by front switch 7 SEGMENT LED
General RELAY Output Electrical Connection Power Storage Temperature Operating Mounting Type Size Weight	Hi/Low A point of contract(AC250V/3A, DC30V/1A) SCREW TERMINAL Connection AC110(50~60Hz), AC220V(50~60Hz) -40~85℃ 0~50℃ Panel 96(W)×48(H)×143(D) 1/8DIN 600g
Option	Sensor Output : Less than 0.75mV/V, More than 3.5mV/V	Sensor Power : ±15VDC
	NPN OPEN COLLECTOR TR S/W Output

SC1400 and SC2400 Indicators have a Micro Processor. The model apply for proper performance. 4CH Relay Output is possible.(A1~A4 have each point of contract) Easy setting by click the front button, it is possible to set Alarm, full scale values, the decimal point and Calibration. When power outages it retains its data.

Model SC1400 / SC2400 -4CH Alarm Output Digital Indicator

Feature
Input Signal: 1~3mV/V(SC1400), V or mA(SC2400)
SETTING LED & DISPLAY LED
Max Readout : ±19999
Auto Zero Point Setting
Analog Output : 0, 1~5V, 10V or 0, 4~20mA(DIP S/W)
Function: Data Hold, Peak Hold, Reset
Frequency Filter : 1, 10, 100Hz(DIP S/W)
48mm×96mm Aluminum Case

	SC1400	SC2400
Sensor Sensor Excitation Sensor Supply Current Sensor Output Sensor Impedance	5VDC or 10VDC Max 120mA(5VDC), 60mA(10VDC) 1~3mV/V(DIP S/W Adjust) 120 or 350Ω	10VDC, 24VDC(5~26VDC Optional) MAX 80mA(24VDC) 0~5,1~5V,0~10VDC, 0~20,4~20mA(DIP S/W Adjust) -
Analog Input Impedance Frequency Filter Analog Output Response Frequency Analog Output ZERO, SPAN Adjustment Output SHORT Protection Circuit Output Impedance Thermal Effect	More than 5MΩ	mA Input 250Ω or 500Ω, V Input More than 5kΩM (DIP S/W Adjust)
	1, 10, 100Hz Max 5kHz 0~5VDC, 1~5VDC, 0~10VDC, 0~20mA, 4~20mA(DIP S/W Adjust) ZERO, SPAN VR Adjust Internal SHORT Protection Circuit Voltage Type 500Ω, mA Type 200kΩ (DIP S/W Adjust) 0.02%FS/℃
Digital A/D Sampling Speed A/D Resolution Max Readout Height of Digits Linearity Decimal point Setting Display Type	15/sec or 30/sec ±4½ Digit ±19999 14mm(H)×8mm(W) ±0.02%FS Be Able to set number of 3 decimal by front switch 7 SEGMENT LED
General RELAY Output Electrical Connection Power Storage Temperature Operating Mounting Type Size Weight	4CH Alarm each A point of contract (AC250V/5A, DC30V/5A) SCREW TERMINAL Connection AC110(50~60Hz), AC220V(50~60Hz) -40~85℃ 0~50℃ Panel 96(W)×48(H)×143(D) 1/8DIN 650g
Option	Sensor Output : Less than, 0.75mV/V, More than 3.5mV/V	Sensor Power : ±15VDC
	Reversal Output Function NPN OPEN COLLECTOR TR S/W Output

SC1800 and SC2800 Indicator have a Micro Processor. The model is able to convert diversified Input to 8step NPN Open Collector Output. Especially devised for heavy industry. Easy setting by click the front button, it is possible to set Step, full scale values, the decimal point and Calibration. When power outages it retains its data.

Model SC1800 / SC2800 - 8CH Alarm Output Digital Indicator

Feature
Input Signal: 1~3mV/V(SC1800), V or mA(SC2800)
STEP or SETTING LED & DISPLAY LED
Max Readout : 0.000~9999
Auto Zero Point Setting
Flexible NPN Open Collector TR Output
TR Output method is changeable
Function: Data Hold, Peak Hold, Reset
Frequency Filter : 1, 10, 100Hz(DIP S/W)
48mm×96mm Aluminum Case

	SC1800	SC2800
Sensor Sensor Excitation Sensor Supply Current Sensor Output Sensor Impedance	5VDC or 10VDC Max 120mA(5VDC), 60mA(10VDC) 1~3mV/V(DIP S/W Adjust) 120 or 350Ω	10VDC, 24VDC(5~26VDC Optional) MAX 80mA(24VDC) 0~5,1~5V,0~10VDC, 0~20,4~20mA(DIP S/W Adjust) -
Analog Input Impedance Frequency Filter Thermal Effect	More than 5MΩ	mA Input 250Ω or 500ΩV, Input More than 5kΩM (DIP S/W Adjust)
Analog Input Impedance Frequency Filter Thermal Effect	1, 10, 100Hz 0.02%FS/℃
Digital A/D Sampling Speed A/D Resolution Max Readout Height of Digits STEP Display LED Linearity Decimal point Setting Display Type	15/sec or 30/sec ±4½ Digit 0.000~9999 14mm(H)×8mm(W) 7 SEGMENT LED(Green) ±0.02%FS Be Able to set number of 3 decimal by front switch 7 SEGMENT LED
General 8 STEP TR Output Electrical Connection Power Storage Temperature Operating Mounting Type Size Weight	8 STEP NPN OPEN COLLECTOR TR Output SCREW TERMINAL Connection AC110(50~60Hz), AC220V(50~60Hz) -40~85℃ 0~50℃ Panel 96(W)×48(H)×143(D) 1/8DIN 600g
Option	Sensor Output : Less than 0.75mV/V, More than 3.5mV/V	Sensor Power : ±15VDC

SC1500 and SC2500 Indicators have a Micro Processor, devised economical model.(Peak Hold, Reset function) Easy setting by click the front button, it is possible to set full scale values, the decimal point and Calibration. When power outages it retains its data.

Model SC1500 / SC2500 - Digital Indicator (simple type)

Feature
Input Signal: 1~3mV/V(SC1500), V or mA(SC2500)
DISPLAY LED
Max Readout : ±19999
Auto Zero Point Setting
Function: Peak Hold, Reset
Frequency Filter : 1, 10, 100Hz(DIP S/W)
48mm×96mm Aluminum Case

	SC1500	SC2500
Sensor Sensor Excitation Sensor Supply Current Sensor Output Sensor Impedance	5VDC or 10VDC Max 120mA(5VDC), 60mA(10VDC) 1~3mV/V(DIP S/W Adjust) 120 or 350Ω	10VDC, 24VDC (5~26VDC Optional) MAX 80mA(24VDC) 0~5,1~5V,0~10VDC, 0~20,4~20mA(DIP S/W Adjust) -
Analog Input Impedance Frequency Filter Thermal Effect	More than 5MΩ	mA Input 250Ω or 500Ω, V Input More than 5kΩM (DIP S/W Adjust)
Analog Input Impedance Frequency Filter Thermal Effect	1, 10, 100Hz 0.02%FS/℃
Digital A/D Sampling Speed A/D Resolution Max Readout Height of Digits Linearity Decimal point Setting Display Type	15/sec or 30/sec ±4½ Digit ±19999 14mm(H)×8mm(W) ±0.02%FS Be Able to set number of 3 decimal by front switch 7 SEGMENT LED
General Electrical Connection Power Storage Temperature Operating Mounting Type Size Weight	SCREW TERMINAL Connection AC110(50~60Hz), AC220V(50~60Hz) -40~85℃ 0~50℃ Panel 96(W)×48(H)×143(D) 1/8DIN 600g
Option	Sensor Output : Less than 0.75mV/V, More than 3.5mV/V	Sensor Power : ±15VDC

SC110H and SC210H have Micro Processor. The models are high speed Indicators(A/D sampling speed 3,000/sec). Easy setting by click the front button, it is possible to set Hi/Low points, full scale values, the decimal point and Calibration. When power outages it retains its data.

Model SC110H / SC210H - High Speed Digital Indicator

Feature
Input Signal: 1~3mV/V(SC110H), V or mA(SC210H)
SETTING LED & DISPLAY LED
Reading rate: 3000/sec
Max Readout : ±19999
Auto Zero Point Setting
Analog Output : 0, 1~5V, 10V or 0, 4~20mA(DIP S/W)
Function: Data Hold, Peak Hold, Reset
Frequency Filter : 1, 10, 100Hz(DIP S/W)
48mm×96mm Aluminum Case

	SC110H	SC210H
Sensor Sensor Excitation Sensor Supply Current Sensor Output Sensor Impedance	5VDC or 10VDC Max 120mA(5VDC), 60mA(10VDC) 1~3mV/V(DIP S/W Adjust) 120 or 350Ω	10VDC, 24VDC(5~26VDC Optional) MAX 80mA(24VDC) 0~5,1~5V,0~10VDC, 0~20,4~20mA(DIP S/W Adjust) -
Analog Input Impedance Frequency Filter Analog Output Response Frequency Analog Output ZERO, SPAN Adjustment Output SHORT Protection Circuit Output Impedance Thermal Effect	More than 5MΩ	mA Input 250Ω or 500Ω, V Input More than 5kΩM (DIP S/W Adjust)
	1, 10, 100Hz Max 3kHz 0~5VDC, 1~5VDC, 0~10VDC, 0~20mA, 4~20mA(DIP S/W Adjust) ZERO, SPAN VR Adjust Internal SHORT Protection Circuit Voltage Type 500Ω, mA Type 200kΩ (DIP S/W Adjust) 0.02%FS/℃
Digital A/D Sampling Speed A/D Resolution Max Readout Height of Digits Linearity Decimal point Setting Display Type	3,000/sec 16bit ±19999 14mm(H)×8mm(W) ±0.03%FS Be Able to set number of 3 decimal by front switch 7 SEGMENT LED
General RELAY Output Electrical Connection Power Storage Temperature Operating Mounting Type Size Weight	Hi/Low A point of contract(AC250V/5A, DC30V/5A) SCREW TERMINAL Connection AC110(50~60Hz), AC220V(50~60Hz) -40~85℃ 0~50℃ Panel 96(W)×48(H)×143(D) 1/8DIN 650g
Option	Sensor Output : Less than 0.75mV/V, More than 3.5mV/V	Sensor Power : ±15VDC
	Reversal Output Function NPN OPEN COLLECTOR TR S/W Output

SC110R and SC210R Indicators have Micro Processor and RS-232 communication function. The models apply best available for local area network. Easy setting by click the front button, it is possible to set Hi/Low points, full scale values, the decimal point and Calibration. When power outages it retains its data.

Model SC110R / SC210R - RS232C Communication Digital Indicator

Feature
Input Signal: 1~3mV/V(SC110R), V or mA(SC210R)
SETTING LED & DISPLAY LED
RS-232 Output
Reading Rate: 19,200 Baud rate(Max)
Transmission Method: 8bit, no parity, 1stop bit
Max Readout : ±19999
Auto Zero Point Setting
Analog Output : 0, 1~5V, 10V or 0, 4~20mA(DIP S/W)
Function: Data Hold, Peak Hold, Reset
Frequency Filter : 1, 10, 100Hz(DIP S/W)
48mm×96mm Aluminum Case

	SC110R	SC210R
Sensor Sensor Excitation Sensor Supply Current Sensor Output Sensor Impedance	5VDC or 10VDC Max120mA(5VDC), 60mA(10VDC) 1~3mV/V(DIP S/W Adjust) 120 or 350Ω	10VDC, 24VDC(5~26VDC Optional) MAX 80mA(24VDC) 0~5,1~5V,0~10VDC, 0~20,4~20mA(DIP S/W Adjust) -
Analog Input Impedance Frequency Filter Analog Output Response Frequency Analog Output ZERO, SPAN Adjustment Output SHORT Protection Circuit Output Impedance Thermal Effect	More than 5MΩ	mA Input 250Ω or 500Ω, V Input More than 5kΩM (DIP S/W Adjust)
	1, 10, 100Hz Max 3kHz 0~5VDC, 1~5VDC, 0~10VDC, 0~20mA, 4~20mA(DIP S/W Adjust) ZERO, SPAN VR Adjust Internal SHORT Protection Circuit Voltage Type 500Ω, mA Type 200kΩ (DIP S/W Adjust) 0.02%FS/℃
Digital A/D Sampling Speed A/D Resolution Max Readout Height of Digits Linearity Decimal point Setting Display Type Communication Type Communication Method	15/sec or 30/sec ±4½ Digit ±19999 14mm(H)×8mm(W) ±0.02%FS Be Able to set number of 3 decimal by front switch 7 SEGMENT LED Asynchronous Half Duplex Communication 8bit, no parity, 1 stop bit
General RELAY Output Electrical Connection Power Storage Temperature Operating Mounting Type Size Weight	Hi/Low A point of contract(AC250V/5A, DC30V/5A) SCREW TERMINAL Connection AC110(50~60Hz), AC220V(50~60Hz) -40~85℃ 0~50℃ Panel 96(W)×48(H)×143(D) 1/8DIN 650g
Option	Sensor Output : Less than 0.75mV/V, More than 3.5mV/V	Sensor Power : ±15VDC
	Reversal Output Function NPN OPEN COLLECTOR TR S/W Output

SC110E and SC210E Indicators have Micro Processor and RS-485 communication function. The models be able to telecommunication. Available to Up to 32 sets of indicators could be parallel. Easy setting by click the front button, it is possible to set Hi/Low points, full scale values, the decimal point and Calibration. When power outages it retains its data.

Model SC110E / SC210E - RS485 Communication Digital Indicator

Feature
Input Signal: 1~3mV/V(SC110E), V or mA(SC210E)
SETTING LED & DISPLAY LED
RS-232 Output
Reading Rate: 19,200 Baud rate(Max)
Transmission Method: 8bit, no parity, 1stop bit
Max Readout : ±19999
Auto Zero Point Setting
Analog Output : 0, 1~5V, 10V or 0, 4~20mA(DIP S/W)
Function: Data Hold, Peak Hold, Reset
Frequency Filter : 1, 10, 100Hz(DIP S/W)
48mm×96mm Aluminum Case

	SC110E	SC210E
Sensor Sensor Excitation Sensor Supply Current Sensor Output Sensor Impedance	5VDC or 10VDC Max120mA(5VDC), 60mA(10VDC) 1~3mV/V(DIP S/W Adjust) 120 or 350Ω	10VDC, 24VDC(5~26VDC Optional) MAX 80mA(24VDC) 0~5,1~5V,0~10VDC, 0~20,4~20mA(DIP S/W Adjust) -
Analog Input Impedance Frequency Filter Analog Output Response Frequency Analog Output ZERO, SPAN Adjustment Output SHORT Protection Circuit Output Impedance Thermal Effect	More than 5MΩ	mA Input 250Ω or 500Ω, V Input More than 5kΩM (DIP S/W Adjust)
	1, 10, 100Hz Max 5kHz 0~5VDC, 1~5VDC, 0~10VDC, 0~20mA, 4~20mA(DIP S/W Adjust) ZERO, SPAN VR Adjust Internal SHORT Protection Circuit Voltage Type 500Ω, mA Type 200kΩ (DIP S/W Adjust) 0.02%FS/℃
Digital A/D Sampling Speed A/D Resolution Max Readout Height of Digits Linearity Decimal point Setting Display Type Communication Type Communication Method	15/sec or 30/sec ±4½ Digit ±19999 14mm(H)×8mm(W) ±0.02%FS Be Able to set number of 3 decimal by front switch 7 SEGMENT LED Asynchronous Half Duplex Communication 8bit, no parity, 1 stop bit
General RELAY Output Electrical Connection Power Storage Temperature Operating Mounting Type Size Weight	Hi/Low A point of contract(AC250V/5A, DC30V/5A) SCREW TERMINAL Connection AC110(50~60Hz), AC220V(50~60Hz) -40~85℃ 0~50℃ Panel 96(W)×48(H)×143(D) 1/8DIN 650g
Option	Sensor Output : Less than 0.75mV/V, More than 3.5mV/V	Sensor Power : ±15VDC
	Reversal Output Function NPN OPEN COLLECTOR TR S/W Output

SC110B and SC210B Indicators have a Micro Processor and converter. The model is applied best available for TTL Level BCD Output convert to NPN OPEN COLLECTOR TR Output. Easy setting by click the front button, it is possible to set Hi/Low points, full scale values, the decimal point and Calibration. When power outages it retains its data.

Model SC110B/ SC210B - BCD Output Digital Indicator

Feature
Input Signal: 1~3mV/V(SC110B), V or mA(SC210B)
SETTING LED & DISPLAY LED
BCD Output type(TTL Level)
Max Readout : ±19999
Auto Zero Point Setting
Function: Peak Hold, Peak Hold ,Reset
Frequency Filter : 1, 10, 100Hz(DIP S/W)
48mm×96mm Aluminum Case

	SC110B	SC210B
Sensor Sensor Excitation Sensor Supply Current Sensor Output Sensor Impedance	5VDC or 10VDC Max120mA(5VDC), 60mA(10VDC) 1~3mV/V(DIP S/W Adjust) 120 or 350Ω	10VDC, 24VDC(5~26VDC Optional) MAX 80mA(24VDC) 0~5,1~5V,0~10VDC, 0~20,4~20mA(DIP S/W Adjust) -
Analog Input Impedance Frequency Filter Thermal Effect	More than 5MΩ	mA Input 250Ω or 500Ω, V Input More than 5kΩM (DIP S/W Adjust)
	1, 10, 100Hz 0.02%FS/℃
Digital A/D Sampling Speed A/D Resolution Max Readout Height of Digits Linearity Decimal point Setting Display Type	15/sec or 30/sec ±4½ Digit ±19999 14mm(H)×8mm(W) ±0.02%FS Be Able to set number of 3 decimal by front switch 7 SEGMENT LED
General BCD Output Electrical Connection Power Storage Temperature Operating Mounting Type Size Weight	TTL Level or NPN OPEN COLLECTOR BCD Output SCREW TERMINAL Connection AC110(50~60Hz), AC220V(50~60Hz) -40~85℃ 0~50℃ Panel 96(W)×48(H)×143(D) 1/8DIN 650g
Option	Sensor Output : Less than 0.75mV/V, More than 3.5mV/V	Sensor Power : ±15VDC
	TTL Level BCD Output convert to NPN OPEN COLLECTOR TR Output (CONVERT BOARD)

查看评论

如果您用过本商品，或对本商品有所问题，欢迎发表自己的评论和问题。我们会及时对您提出的问题解答，对您的评论给予鼓励。谢谢对本站的支持。

发表评论

您的姓名：
主题：		·尊重网上道德，遵守《全国人大常委会关于维护互联网安全的决定》及中华人民共和国其他各项有关法律法；
评论正文：
		·本站有权保留或删除您发表的任何评论内容