Supply Voltage : AC 24V ±10%
Frequency : 50 / 60 ㎐
Power Consumption : 5 VA ~ 7.5VA( on operation )-3W
Control Signal : DC 0~10V / 4~20mA ( Multiple use )
Positioning Accuracy : ±5%
Nominal Torque : 200 Kg-㎝(20 Nm)
Nominal Rotating Range : 0 ~ 90°
Mechanical Rotating Range : 95°±2° ( mechanical control limit at 95°)
Rotating Direction : Direct / Reverse Action ( built-in direction converting PIN )
Operating Time : 110 sec.
Operating Condition : -30 ~ +50℃, below 95%RH
Connecting Cable : 0.5sq.mm ~ 1.5mm
Noise Degree : 45 dB
Protection Class : IP 42
Weight : 1.72 Kg
Applicable damper shaft : Φ10~Φ20 ( round pipe ), □10~□16 ( square pipe )

Mounting Bracket : To mount Actuator on damper axis directly, it must be used with mounting bracket and fixing pin of mounting bracket should be correctly fixed on the groove of Actuator.
Mounting Location : Select easy location for setting dial of front side of Actuator and cable connection.
Manual Control : To adjust correct open/close function of switching location of damper, first to press manual button according to mounting procedures and adjust shaft adaptor and location indicator.
Mechanical limitation for rotating degree movement : can be limited rotating degree movement by 5°between 0°to 90°.

Mounting Bracket : To mount Actuator on damper axis directly, it must be used with mounting bracket and fixing pin of mounting bracket should be correctly fixed on the groove of Actuator.
Mounting Location : Select easy location for setting dial of front side of Actuator and cable connection.
Manual Control : To adjust correct open/close function of switching location of damper, first to press manual button according to mounting procedures and adjust shaft adaptor and location indicator .
Mechanical limitation for rotating degree movement : can be limited rotating degree movement by 5°between 0°to 90