아날로그 신호 입력기(KCAI) 통신신호 변환기(KCCC) 카운터 신호 입력기(KCCI) 복합신호 입력기(KCDA) 인터넷 커플링(KCDE) 디지털 신호 입력기(KCDI) 디지털 신호 출력기(KCDO) 디지털 신호 전력 집합기(KCPM) 무선제어기(KCSC) 디지털 신호 표시기(KDMA)
Transducer传感器
DIGITAL SIGNAL INPUT MODULE / KCDI Type Source Input Voltage Number of Input points AC 90~260V, DC 85~145V OFF Decided voltage DC 0~4V ON Decided voltage DC 6~12V 16Point(8Point/1Common, 8Point/1Common) Introduction It is the device which transmits the status of On/Off (close/open) of Various relays/Switches, etc. to Serial communication when the high level HOST, which is connected to RS-485 communication, requests the information. General Specifications COUNTER INPUT MODULE / KCCI Type Common Matter Communication Specifications Introduction It is the device which counts the On/ Off (Close/Open) displacement of digital contact (prox. switches, rotary encoder, contact output of transducers, etc.), and transmits the counted data to high level HOST via RS-485 communication. General Specifications ANALOGUE INPUT UNIT MODULE / KCAI Type Source Input Output Input Channel No. Accuracy Source Input Maximum count Number of maximum input AC 90~260V, DC 85~ 145V 4~20mA Number of unipolar binary 12 bit input channel(0~4095) 8Channel/Unit(1Common) within (0.5%+2digit) AC 90~260V, DC 85~ 145V OFF Decision Voltage DC 0~4V ON Decision Voltage DC 6~12V 999,999 4 Source Input / Output Transmission speed Transmission distance Number of maximum low level contacts AC 90~260V, DC 85~ 145V High level : Being TCP/IP (Lan) it depends on the program provided by the manufacturer low level : RS-485(Serial) High level : 10Mbps, 100Mbps maximum 300m low level : 9600bps maximum 1.2km 32 Protocol Interface Transmission type Maximum transmission distance Transmission speed Character composition (data format) Communication identifying method Melsec or Modbus RTU RS-485 Multi Drop 2Wire(Twist pare) Half-duplex start-stop synchronous type within 1.2 9600 bps(Standard), 19200 bps Start 1bit, Data 8bits, Stop 1bit, Parity None Mormal operation on Rx, Tx LED OFF Introduction It is the device which transmits DC current and voltage, which is the analog signals from transducers, to high level HOST via RS-485 communication. General Specifications(Input/Output) DIGITAL OUTPUT UNIT MODULE / KCDO Type Source Input Output Number of Input points AC 90~260V, DC 85~ 145V RS-485 Serial Signal Relay AContact Output (Max.AC 125V/600mA DC 110V/600mA, DC 3V/3A) 8Point(8Common) Source Input Output Number of Input points DC 24V 10% RS-485 Serial Signal Open Collector (Max.DC 24V/50mA) 16Point(1Common) Introduction It is the device which changes RS-485 communication signals from the high level HOST via Serial communication to Relay or Open Collector On/Off signals by using built-in control circuit of the output machine. General Specifications (KCDO-08) (KCDO-16) INTERNET COUPLING / KCDE Type Introduction It makes it possible for internet monitoring and remote control of the devices mounted on the site. For the internet monitoring, both fixed IP or flexible IP (DHCP) is available. General Specifications Input / Output Transmission speed Transmission distance Number of maximum low level contacts High level: RS-232(Serial) low level : RS-485(Serial) Maximum 38400bps High level:within 15m,low level:within 1.2km 32 RS-232/RS-485 CONVERTER / KCCC Type Introduction It provides intermediating function by changing RS- 485 communication signals from the devices mou nted on the site to the RS-232C signals recognized by the computer. General Specifications DIGITAL/ANALOGUE INPUT MODULE / KCDA Type Source Input /Output Item Analogue Input (Temp. measuring) Contact Input Contact Output Standard Input : Temp. sensor Pt 100 digital display type : Signal Integer Accuracy : 1%, Channel No. : 2Channel Measuring range : -10 ~ 100 On Decided voltage : DC 6~12V Off Decided voltage : DC 0~4V Channel No. : 8Channel(1Common) Output : Relay A,BContact Channel No. : 4Channel(4Common) AC 90~260V, DC 85~ 145V Introduction It is the device which is composed of 2EA of analog signal input (Temp.), 8EA of digital signal contact input (status), and 4EA of digital signal output (control), and it communicates with high level HOST via RS-485 communication. General Specifications POWER SIGNAL COMMUNICATION / KCPM Type Source Input AC 90~260V, DC 85~ 145V, 5VA Line voltage 10~500V Ampere 0.1~6A Power Factor 0.5~1.0(lag ) Accuracy V : (0.5% of FS+1digit) A : (0.5% of FS+2digit) W : (0.5% of FS+2digit) var : (1.5% of FS+2digit) PF : (3% of FS+2digit) Hz : (0.1% of rdg+2digit) Unit : mm Introduction It is the device which transmits 3 voltage, 3 current, electric power, Power Factor, frequency, the amount of reactive power, the amount of reactive power to high level HOST via RS-485 communication (it is the same device with our KDX). General Specifications DIMENSIONS TYPE L Type LL Type W H D 105 60 86 157 60 86 TYPE KCCC KCPM W H D 54 22 67 150 120 75
|